Now 100% compatible with both the Gen 1 and the new Gen 2 Ruger American Rifle® and also 100% compatible with ALL aftermarket Gen 1 triggers including JARD® and Timney®( Check with your aftermarket trigger maker on Gen 2 compatibility, there are none out yet as of 3/15/24). For ANY questions including inventory, applications, etc email gary@icdproducts.com Jard Trigger link: https://jardinc.com/ruger-american

Our original Indian Creek Design Ruger American® Short Action MoFo (MOdular FOre-end) Chassis was designed from the ground up by Ruger American® (RA) shooters for use in hunting and competition. In this newest incarnation it remains the only 100% American made billet chassis made specifically for the RA versus some rehashed Remington 700® inlet that isn’t ergonomically suitable for use with the tang safety design of the RA line. The MoFo Chassis is the solution to the most common issues facing RA owners who enjoy the phenomenal accuracy and relatively low entry price of the rifle but would like something to address the flexible economy grade factory polymer stock. Whether used for hunting or for ringing steel, punching paper or keeping your area's varmint population under control, ICD has you covered.

Customizing your RA has never been easier! You can outfit your chassis as you see fit, making it mild or wild as it utilizes common AR hardware for the pistol grip and butt-stock. The possibilities are virtually endless, and because we’re blue collar folks like most RA owners are you know we packed it full of value with features others charge premiums for.

The MoFo Chassis comes with the buyer's choice of 3 different Fore-ends:

· Tommy- patterned after the fore-end from the WWII era Thompson submachine gun, our Tommy fore-end makes your MoFo exactly the same length as your OEM Ruger® stock and that chassis weighs 1 pound, 10 ounces. It comes with a sling swivel and a few 10-32 threaded holes spaced out to add a length of pic rail if desired.

· Johnny- 3 inches longer than the OEM Ruger® stock, with a full length RRS standard ARCA Swiss rail milled into the bottom of the fore-end. The Johnny also features 6 M-Lok® slots on the sides and bottom. the Johnny is our most popular fore-end, with features you'll not find on any other chassis without spending hundreds more for. Thanks to it’s innovative design this longer fore-end weighs less than our Tommy so a full chassis weighs but 1 pound, 9 ounces.

· Lil John- As the name implies, this is a shorter version of our Johnny fore-end, featuring 8" of ARCA Swiss rail and 4 M-Lok® slots on the sides and bottom of it. While the Lil John is perfectly scaled to fit the popular Ruger American Ranch® 16" barreled rifles it can be used with any RA. The Lil John is 2 ounces lighter than the Johnny so your chassis weighs but 1 pound 7 ounces.

All MoFo Chassis are finished in Black Type III Hard Coat anodizing. Hard Coat Ano is an enduring finish that will stand up to the rigors of field use and it protects the billet aluminum more than any other treatment. And even though they look as good as they shoot, you can always paint or Cerakote right over the anodizing if you want a different look than basic black.

Chassis Details

IF LOOKING FOR A LEFT HANDED MODEL, email gary@icdproducts.com. We often have them in stock with no wait-

The ICD RA/SA Chassis comes with new 1/4 - 28 x 1" action screws with bushings, a 1/4-20 x 3/4" grip screw, action saddles, magazine release and associated hardware (dowel pin, spring, and set screw), 1/4-20 x 3/8" fore-arm mount bolt, and a front sling swivel post on the Tommy fore-end.

The RA/SA MoFo chassis uses AICS pattern external box magazines (.223/5.56* and .308)

Magpul®, Accurate®, Ruger®, MDT® and American Rifle Company® AICS pattern magazines have been tested in the chassis. Minor tweaking is needed for some older poly Magpul AI mag to seat properly due to Magpul's catch positioning which is different than ALL other AICS magazines. Watch this short video to see how to fix that- https://youtu.be/94ll0x0szbA Minor magazine tuning may be required with most applications, as with ALL chassis and aftermarket stocks. Email us for tips and tricks, it’s really easy!

*Note: .300 Blackout will not feed 100% reliably due to the cartridge shape. This is NOT solely a chassis issue but a cartridge shape issue when used with the AICS pattern magazine. We STRONGLY suggest not using an ai magazine with 300blk, but rather using our AR/MoFo inlet with a factory AR mag compatible RA barreled action instead. Email gary@icdproducts.com for more information on this matter.

We suggest only using Carbine style buttstocks. The MoFo accepts AR collapsible commercial and MilSpec buffer tubes, our STFU side folder, and many other items. We do not recommend any fixed/Rifle patterns stocks due to the tang safety design of the RA and how that interferes with the shooters grip hand. You CAN run a Rifle stock, but we caution you to look at the application more closely first.

The MoFo accepts all flat top AR pistol grips (without beavertail) and while some soft beavertail models may fit depending on the style/manufacturer, we do not recommend their use as safety access may be hampered. Every good grip with a beavertail has a flat top version of it too- Seek out the right stuff!

Max Barrel profile is a straight taper 1.4" O.D. (yes, larger than any RA action can accept, so it can fit any barrel you can fit to the RA action.

Email gary@icdproducts.com for help with ANY questions regarding the ICD Ruger RA/SA Chassis.